how many watts are kicker cvr 12

The CompVR 12-Inch Subwoofer works best with a sealed or ported enclosure and 400 watts of recommended power.

How many watts does a KICKER 12 need?

12″ Comp 4 Ohm SVC

This Comp sub features a thick woofer cone with 360-degree back bracing, a strong motor structure and perimeter venting to ensure you get the reliable bass you need. The Comp 12-Inch Subwoofer works best with a sealed or ported enclosure and 150 watts of recommended power. See below for more details.

How many watts is 2 12-inch kickers?

(2) Kicker 43C124 Comp 12″ Car Subwoofers Totaling 600 Watt with Single Voice Coil.

What size amp do you need for a 12 inch kicker?

A: You need at least a 500 watt amp with one of these speakers more if you have two. A: I definitely would not recommend 1000 watts on this subwoofer continuously. You will definitely damage the sub very quickly. If it was 600 to 750 watts you would be ok.

How many watts is a 12 inch Kicker Comp C?

*The CompC 12-Inch Subwoofer works best with a sealed or ported enclosure and 300 watts of recommended power. See below for more details.

How many watts can a 12 inch sub handle?

How many watts does a 12 inch sub need? A 12 inch sub woofer requires anywhere from 150 to 1000 watts in order to reproduce the sound at the same level that it was intended. This will be determined by the power rating of your speakers, but in general, you need an amp that can handle 300 watts.

What size amp do I need for 2 12-inch kicker subs?

You will need a 1000 RMS watt amp.

Are Kicker Comp R good subs?

If you are looking for hard-hitting, accurate bass, the Kicker Comp R subwoofer is a great choice because the Comp R has enough power handling to get you the output you expect from a “Step-up” subwoofer.

How many watts can a kicker comp R handle?

The CompR 10-Inch Subwoofer works best with a sealed or ported enclosure and 400 watts of recommended power. See below for more details.

How many RMS is 1000 watts?

In fact, most amplifiers labeled as 1000 watts PMPO have a true RMS output of 10 watts or less. One that I measured put out 7.5 watts per channel.

What wattage subwoofer should I get?

If you have: A factory radio — you won’t need more than 50 to 200 watts RMS of power for the bass. An aftermarket receiver — you might want 200 to 300 watts RMS of power. Amplified speakers with around 50 watts RMS per channel — 250 to 500 watts RMS is a good starting point.

Should speaker wattage be higher than amp?

As a very vague rule of thumb, we normally recommend around twice as much amplifier power as speaker’s power rating. For example, if a speaker is rated at 200 watts, we’d use a 400 watt amp. Again, the idea is to have enough clean power to handle whatever you throw at the amp without clipping.